2001 Duetto master switch

Good morning,
I have recently acquired a 2001 Duetto so am new to this forum.
Unfortunately one of the rocker switches on the control panel(above cooker) needs to be replaced as has broken inside. This is labelled 10 amp, 240 volt and has a cut out size of 13mm x 28 mm.
Would anyone know who would be able to supply a replacement or very similar.
Any advice would be much appreciated
Thankyou
Peter

Radio Spares?

[You must be registered and logged in to see this link.]

As Gromit says, RS will have a range of suitable switches, and if that fails, CPC (Farnell) also supply to non-trade customers. RS is probably the better bet as IIRC they have no minimum order, while CPC does.

Peter, did you solve this problem? I have the master switch on that panel stuck. Autosleeper say they don't have the panel any more and didn't offer an alternative.
I am not technical at all, as my late husband used to deal with these things, so I would appreciate some advice. Thanks

Isobel - Peter Thomas hasn't visited forum since May so you are unlikely to get a reply from him.

I suggest you say hello here......
[You must be registered and logged in to see this link.]

And then start your own thread in 'van conversions' section.

Hi  
 

Peter Thomas wrote:Unfortunately one of the rocker switches on the control panel(above cooker) needs to be replaced as has broken inside. This is labelled 10 amp, 240 volt and has a cut out size of 13mm x 28 mm.

 

Isobel wrote:Peter, did you solve this problem? I have the master switch on that panel stuck. Autosleeper say they don't have the panel any more and didn't offer an alternative.

 
Isobel does it look anything like this ?:

[You must be registered and logged in to see this link.]

Cut out 13mm by 28.5mm as required. It seems a bit of an odd size (aren't they always) so not too many alternatives.
 
If your switch is different a picture would be helpful.  
 

Paulmold wrote:I suggest you say hello here......
[You must be registered and logged in to see this link.]
 
And then start your own thread in 'van conversions' section.

 

Agreed somebody else may have another source and it’s nice to have an intro anyway.  
 
Brod