Kingham body work damage

Slight damage to the mid rear drivers side , on my Kingham motorhome , roughly the same position as the BBQ on the other side , not averse to repairing and repainting myself , but in order to cut down on the filler , it might need pressure applied to the other side , that means taking the interior panelling off , anybody out there got any suggestions , cheers Ron

It is possible to pull a dent out from outside without access to Inside and the hassle of removing interior trim. Kits are available  if dent not too deep or creased and involve hot gluing a stud to the panel and then using a small frame to pull the dent out . A heat gun then removes the stud for reuse.

Any further responses should be put on duplicate post in van section. This section is for owners club topics.


[You must be registered and logged in to see this link.]