Under seat locker

The only access in my Kingham to under the side settee is by lifting the seat, to open fully the cushions have to be removed. I was wondering on the practicality of fitting a drop down locker. To match the door to the electric panel it would need to be 200 mm high with a length of 550-600mm. Can anyone advise if AS do a door of this size on another model and any reference I could use when contacting the spares department? Thanks

Find your build number it should be in the glove box
Contact AS they'll be able to tell you the exact woodgrain, they must get the material from somewhere, either way you may be able to get a match once you know the woodgrain

I don't know the Kingham, but I had the same problem so I made my own drop down door - just like the ones A/S used to fit before the bean counters got so stingy!!

I got an offcut from A/S stores which matched perfectly, except that the grain of the imitation wood runs the wrong way. If that doesn't bother you, it might be worth asking if they still have similar offcuts available.

I can't remember how much it was, but it was a tiny fraction of the cost of getting them to make and fit one.

Dave

Thanks for advice. Will contact AS