Re: " simple?" microwave question

by babian Sat Mar 07, 2020 7:06 am

GP1069,
peter are you saying that your microwave is now attached to the bottom shelf with approx. 6mm cap head Allen bolts and washers?
photo shows rubber mountings which could help vibration, but sure bet that microwave won't come loose again!!!

by GP1069 Mon Mar 09, 2020 2:15 pm

Yes, used rubber bobbins/mounts to help with vibration and to make sure the microwave doesnt go flying(i hope) in an accident. Also added blocks to the bottom shelf to strengthen it.

[You must be registered and logged in to see this link.]

I used 2010MF12-60, 20mm diameter and 10mm high, male one end to bolt to the microwave and female other end to bolt through the cab.

[You must be registered and logged in to see this link.]

I have spare allen bolts if you go down this route.

As long as you are comfortable with removing the microwave cover and transfomer assy if you have a Daewoooo, i'm an electronics/instrument engineer. Newer version microwave an easier install.

Let me know if you need any further details etc.