perished sliding window moulding

The mouldings that separate the sliding side window from the fixed part are badly perished on our 98 Symphony. There is no problem with water ingress, but I think that the windows will soon rattle.
Has anyone replaced these?

No, but here is where I went for kit car parts, Woolies

[You must be registered and logged in to see this link.]

Bill
I used 722A from Vintage Car Parts https://www.vintagecarparts.co.uk/products/722a-window-channel-universal-flock-rubber 
'Rock' it in by moving sliding window back and forth as new trim is inserted

There is a post about this somewhere, I need to do a search. I though that someone had got some from Autosleeper (who sourced a suitable profile) just last year. It's on my eternal 'to do' list!

Hi. 
I purchased similar track/runners  from Autosleepers in June 2017 for the side windows on a 1991 Talisman and a 1990 Legend . It was not the original item but it fitted very well.  I cut my own drain channels with a modelling knife. 


Part number is WW0144 at £3.55 + vat per metre.
 
Yours may be a different track but certainly worth checking with them. Tel:  01386 853338

Best wishes, Steve

Hi. 
I purchased similar track/runners  from Autosleepers in June 2017 for the side windows on a 1991 Talisman and a 1990 Legend . It was not the original item but it fitted very well.  I cut my own drain channels with a modelling knife. 

Part number is WW0144 at £3.55 + vat per metre.
 
Yours may be a different track but certainly worth checking with them. Tel:  01386 853338

Best wishes, Steve


Apologies for the double post .... how to delete one ?