Tap replacement 1997 Duetto
4 posters
The Auto-Sleeper Motorhome Owners Forum (ASOF) :: Auto-Sleeper Motorhome Forums :: Auto-Sleeper "Van Conversions" Forum
Page 1 of 1
Tap replacement 1997 Duetto
We Any tips on how to access the back of the kitchen sink taps to enable me to replace them. Also advice on the wiring of the micro switch would be appreciated. Thanks Batty Jenny
Batty Jenny- Member
-
Posts : 31
Joined : 2015-07-27
Member Age : 71
Location : West Sussex
Auto-Sleeper Model : Duetto
Vehicle Year : 1997
Re: Tap replacement 1997 Duetto
As far as I know AS don't use microswitchs as they use pressure system with Shurflo pumps, certainly in the age range of your Duetto.
_________________
Nice to be important but more important to be nice
Paulmold- Donator
-
Posts : 26679
Joined : 2011-02-21
Member Age : 73
Location : North East Wales
Auto-Sleeper Model : Sussex Duo
Vehicle Year : 2010
Re: Tap replacement 1997 Duetto
Our 1996 Duetto uses a pressure system, so no microswitches.
I too have wondered how I would access the plumbing to the kitchen taps; I assume you could get to them from the outside via the fridge vent?
I too have wondered how I would access the plumbing to the kitchen taps; I assume you could get to them from the outside via the fridge vent?
Achilles heel- Member
-
Posts : 122
Joined : 2015-10-16
Member Age : 74
Location : gloucestershire
Auto-Sleeper Model : Duetto
Vehicle Year : 1996
Re: Tap replacement 1997 Duetto
Thank you both for your replies. That’s one less thing to do. I will try the access via the fridge vent as suggested.
Batty Jenny- Member
-
Posts : 31
Joined : 2015-07-27
Member Age : 71
Location : West Sussex
Auto-Sleeper Model : Duetto
Vehicle Year : 1997
Re: Tap replacement 1997 Duetto
It is via fridge vent, I have just done mine on 96, very fiddly though!
Cheapest replacement I found was from CAK / leisure lines.
[You must be registered and logged in to see this link.]
Please note doesn’t include screw on barb ends if needing to replace, they are separate order.
Cheapest replacement I found was from CAK / leisure lines.
[You must be registered and logged in to see this link.]
Please note doesn’t include screw on barb ends if needing to replace, they are separate order.
Karlos1968- Member
-
Posts : 9
Joined : 2020-02-08
Location : Kent
Auto-Sleeper Model : Duetto
Vehicle Year : 1996
Re: Tap replacement 1997 Duetto
Thanks for your reply Karl’s I will look at that today. I have bought a replacement tap which includes wires for a micro switch, I guess I just don’t use that part. The supplier seemed to think that they do not do the part without the switch however I have not unpacked it yet so will look at CAK and exchange if necessary.
Batty Jenny- Member
-
Posts : 31
Joined : 2015-07-27
Member Age : 71
Location : West Sussex
Auto-Sleeper Model : Duetto
Vehicle Year : 1997
Re: Tap replacement 1997 Duetto
Now removed top o/s fridge vent plus surround to get access to the back of the taps. Undone pipe connections ( some water spillage) to reach tap back nuts. Need a 26/27mm open ended spanner or similar and a slim wrist. The old taps removed had micro switch wires snipped off which confirms that not needed on my model (as per the other members ) Thanks all. Hope this may help others.
Batty Jenny- Member
-
Posts : 31
Joined : 2015-07-27
Member Age : 71
Location : West Sussex
Auto-Sleeper Model : Duetto
Vehicle Year : 1997
Similar topics
» Replacement for much-loved 1997 Symphony
» LABCRAFT PROBLEM ON A 1997 DUETTO
» Heater in 1997 Duetto
» Duetto 1997 with children
» DUETTO 1997 DRY STEERING
» LABCRAFT PROBLEM ON A 1997 DUETTO
» Heater in 1997 Duetto
» Duetto 1997 with children
» DUETTO 1997 DRY STEERING
The Auto-Sleeper Motorhome Owners Forum (ASOF) :: Auto-Sleeper Motorhome Forums :: Auto-Sleeper "Van Conversions" Forum
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum