Broadway FB Kitchen surface ext.

The pull out surface has a loose metal clip which catches as it is slid in and out. It looks as if it is meant to act as a pullout stop control.  Is it a matter of tightening the screw slightly as it allows the surface to come out too far, resulting in a gap?

DjH 45 wrote:The pull out surface has a loose metal clip which catches as it is slid in and out. It looks as if it is meant to act as a pullout stop control.  Is it a matter of tightening the screw slightly as it allows the surface to come out too far, resulting in a gap?

Yours might be different to ours.  We don't have a loose metal clip.  When the worktop is pushed home fully it clicks into place and has to be pulled firmly to bring it out again.  It will only come out as far as its runners allow and when it is out nothing holds it in place.  It sounds as though you have a snagging problem that the dealer should fix.