Kingham bathroom sink

Hi could anyone tell me how to tighten up the tap in a kingham bathroom sink please

Hello and welcome to this most friendly and informative forum. On the home page far right is the search box so put in bathroom tap to reveal how to do it. 

I had a similar issue with a loose bathroom in our 2019 Kemerton XL. After the dealer had two goes at tightening the tap in July I went back to A-S in Willersey. They replaced the tap with a slightly different tap that has a much less stiff to turn mixer spout. Afterwards I had to swap over the tops because the peg on the new tap would foul against the tip up sink which turned the water on.

I think the tap A-S originally chose was unsuitable to be mounted in a thin plastic sink because the swivel spout being so stiff to turn causes the single mount nut to become unscrewed. There are other solutions that involve beefing up the area around the hole. I'd recommend having a different tap fitted as A-S did in our van.

[You must be registered and logged in to see this link.]