Fitting tv bracket to Kingham

Hi, I am looking at fitting a tv bracket on a Kingham but do not at present have the van available to view.
The bracket would be fitted at the Tv point on the front of the wardrobe, and my question is can the retaining bolts pass through to the inside of the wardrobe or is there a void that contains wiring

Thanks Ken

Its just a single thickness panel, but there is a plastic domed cover concealing the wires on the inside of the wardrobe which comes off easily. My tv bracket goes just to the side of this with 3 bolts with penny washers and a piece of ply to add strength. It’s a similar situation on the bed side of the wardrobe but you have to use a slim bracket to enable the bed to lift past the bracket. Tim

Thanks Tim that's great, I am not that good at fitting things but it means that I can do this job ok 

Ken

Ken

Not sure quite where you are or how much of a hurry you are in?

But not in a rush I have a TV bracket, and I think I’ve still the piece of ply and bolts from the one I removed from my auto sleeper - ex cond - I just don’t watch TV.

I’ll be up in North Norfolk in the first few weeks of Feb or alternatively have a friend I could pass it on to this weekend who lives at Hitchin and might even be closer to you.

All a bit too heavy to post - but free if you are interested just love it to go to a good home.

Rob

Hi Rob, thanks so much for the offer but today I have had delivered two brackets for the van.

By the way I am based near Kings Lynn

Ken

I’ll be up at North Wooton in Feb!

Rob