Sargent control panel
3 posters
The Auto-Sleeper Motorhome Owners Forum (ASOF) :: Auto-Sleeper Motorhome Forums :: Auto-Sleeper "Van Conversions" Forum
Page 1 of 1
Sargent control panel
Could someone tell me how to replace my Sargent EC 51 control panel please
Rich
Rich
rich g- Member
-
Posts : 195
Joined : 2014-05-20
Member Age : 75
Location : Worcester
Auto-Sleeper Model : Peugeot Warwick Duo
Vehicle Year : 2009
Re: Sargent control panel
First, turn the power off at the top left button on the EC51.
To remove the EC51 slide the bezel down (use your finger tips in the middle of the bottom bezel) and slide down whilst pulling slightly outwards (sounds more complicated than it is).
With bezel removed undo two short screws that hold the unit in place and pull the unit out.
Remove the three or four (I forget which) connectors from the back of the unit.
Reverse the above to replace.
Job done!
To remove the EC51 slide the bezel down (use your finger tips in the middle of the bottom bezel) and slide down whilst pulling slightly outwards (sounds more complicated than it is).
With bezel removed undo two short screws that hold the unit in place and pull the unit out.
Remove the three or four (I forget which) connectors from the back of the unit.
Reverse the above to replace.
Job done!
Spospe- Donator
-
Posts : 1764
Joined : 2013-11-17
Member Age : 80
Location : South Manchester
Auto-Sleeper Model : Warwick Duo
Vehicle Year : 2014
Re: Sargent control panel
Hi Rich
In answer to your next question ( ) the connectors are all uniquely shaped, so you won't be able to put them back in the wrong place.
I had to remove my panel once, and went out with little stickers at the ready to place on the leads. Felt a right twerp when I realised I had just solved a non-existent problem!
In answer to your next question ( ) the connectors are all uniquely shaped, so you won't be able to put them back in the wrong place.
I had to remove my panel once, and went out with little stickers at the ready to place on the leads. Felt a right twerp when I realised I had just solved a non-existent problem!
Gromit- Donator
-
Posts : 7265
Joined : 2015-03-11
Member Age : 81
Location : Worcestershire
Auto-Sleeper Model : Nuevo EK LP
Vehicle Year : 2015
Re: Sargent control panel
Thank you for your fast responses,do I need to disconnect any live wires when disconnecting and connecting panel other than those connected to the panel. Thank you Rich
rich g- Member
-
Posts : 195
Joined : 2014-05-20
Member Age : 75
Location : Worcester
Auto-Sleeper Model : Peugeot Warwick Duo
Vehicle Year : 2009
Re: Sargent control panel
Not as far as I know Rich.
To be safe you could switch everything off, including the main Sargent charger unit.
I had no problems when I did mine.
To be safe you could switch everything off, including the main Sargent charger unit.
I had no problems when I did mine.
Gromit- Donator
-
Posts : 7265
Joined : 2015-03-11
Member Age : 81
Location : Worcestershire
Auto-Sleeper Model : Nuevo EK LP
Vehicle Year : 2015
Similar topics
» Help!! Sargent control panel
» Sargent control panel switched itself off
» Sargent EC480 Control Panel
» Sargent EC700control panel on Warwick XL 2019
» EC155 & Sargent EC51 Control Panel issues
» Sargent control panel switched itself off
» Sargent EC480 Control Panel
» Sargent EC700control panel on Warwick XL 2019
» EC155 & Sargent EC51 Control Panel issues
The Auto-Sleeper Motorhome Owners Forum (ASOF) :: Auto-Sleeper Motorhome Forums :: Auto-Sleeper "Van Conversions" Forum
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum