Reversing camera stopped working

The reversing camera (a Veba unit) has stopped working on our 2014 Warwick Duo. Can any one tell me where the camera is fused, as that seems a good pace to start looking. I know that AS are noted for moving things round and I do not fancy having to half-dismantle the van looking. The screen is completely blank, no visible image at all.

It may be just coincidence, but this vehicle has just come back from the Peugeot dealers after a protracted investigation into its disappearing oil level display in the instrument panel (at least I hope it is a coincidence).

• [You must be registered and logged in to see this link.]
  
  
  
  
• [You must be registered and logged in to see this link.]
  
• [You must be registered and logged in to see this link.]
  

[You must be registered and logged in to see this link.]

 by [You must be registered and logged in to see this link.] on Mon Apr 29, 2013 9:13 am
The 12v connection for the camera and monitor is under the drivers door step. That is where the camera and monitor cables are joined and I would think it an easy job to change the 12v supply to an ignition fed one so that it is on whenever the engine is running.

Fortunately on the Warwick Duo that is how it's wired so that it comes on whenever the engine is started.

Thanks for that, I will have a look on Monday.

If the swop over works let us know please

Sorry in a way to report that the wretched camera system started working again, all by itself.

Out of curiosity I took the headlining finisher strip down (the part that the front windscreen blind hooks onto) and found the connecting plug and socket for the Veba screen. The connection looked OK, but I pulled the joint apart and re-connected it (just in case). However, at the time of writing the camera is perfect: most un-confidence making.