EC325 Control Panel

Hi Has anybody had a problem with their EC325 Control Panel, Mine today showed System Disabled /Engine Started I tried rebooting the panel but this did not solve the problem and then the engine battery had discharged so I was not able to start the engine. Any ideas
Tugg 

Hi Tugg
Carn't help with your problem, however ,Mark Burdett at Willersey should be able to point you in the right direction.
01386853511.
Boaby

The fact that your engine battery has gone flat also would suggest to me a possible fault with the alternator or alternator to EC325 wiring.
A output signal from the alternator is used to detect that the engine is running and becomes an 'engine running' signal to the EC325. This operates circuitry in the EC325 which disables the habitation electrics.
Under conditions where the engine is not running there should be no battery voltage present on this lead from the alternator.
If there is, then this could give the symptoms your describe.
No doubt there are other possibilities but I would check this.

Hi Backtrax   I think this sounds like this could  likely be the problem Thanks for help
Cheers Tugg