Awning

Hi we have a 2008 Nuevo with a wind out awning which is built into the side of the van.When it is wound in the rear end does not go flush with the van does any one know if this can be adjusted to go in like the front does thanks.

Try pushing the bottom at the rear, it should snap into place. Mine is the same, I use the winding handle to push it.

There is usually an adjustment method for this problem. If you can post the make & model awning then we might be able to refer you to the manufacturer's instructions for your particular unit.

Meanwhile, does this help at all:

https://www.youtube.com/watch?v=vY3NubzC29k

rogerblack wrote:There is usually an adjustment method for this problem. If you can post the make & model awning then we might be able to refer you to the manufacturer's instructions for your particular unit.

Meanwhile, does this help at all:

https://www.youtube.com/watch?v=vY3NubzC29k

The awning in the video is a Fiamma, the OP will have a Thule Omnistor awning with different adjustment.

Thanks for that the video was interesting will have a go at using the winding handle if that is no good will look at the adjuster as in the video thanks all for your help.