Grill thermocouple

Has anyone replaced the grill thermocouple on the Thetford Caprise mk 111??
Im in Spain at the Moment so I will have to get one from Amazon I guess....does anyone know the correct thermocouple ?

I’ve found this but not sure if it’s correct.

Ray

https://www.amazon.co.uk/Thetford-Oven-Thermocouple-Electrod-SSPA0626/dp/B07QR5S93L/ref=sr_1_3?dchild=1&keywords=thetford+caprice+mk111+grill+thermocouple&qid=1606899150&quartzVehicle=138-233&replacementKeywords=thetford+mk111+grill+thermocouple&sr=8-3

O.k.....I’ve managed to order the correct thermocouple.

I’ve tried to remove the top cover...it might give me access to the connection....not so easy....anyone have any knowledge on this subject??

Ray

Mines gone also so I will be interested to see how you get on.

Tony Comber

No luck yet Tony....I suspect I can get at it with the top removed but not as straight forward as it appears.....I’m hoping that it’s not an oven out job...

Ray

Mine is suspect.

I know the Thetford UK Technical Support Engineer and had a chat with him about it at Feb NEC. He advised the oven has to be removed to get access for replacement. He was going to check mine out at the ASOC National last May but of course that never happened - its been ok every time we've used it since Feb!

Peter Brown wrote:Mine is suspect.

I know the Thetford UK Technical Support Engineer and had a chat with him about it at Feb NEC.  He advised the oven has to be removed to get access for replacement.  He was going to check mine out at the ASOC National last May but of course that never happened - its been ok every time we've used it since Feb!

Thank Peter...that is my concern...even removing it is a pain..there are 4 screws holding the cooker in...but...my worry is whether the connection fitting is flexible hose??? If it’s a fixed pipe fitting that’s going to be a big stripdown job...

Would you know if that’s the case?  I could ask Autosleeper I guess!

Ray

I've sent you a pm Ray.

Thanks Peter...very helpful

Ray