Corinium Duo.

What I find more troubling is the impact on the Alko suspension and the oft talked about greasing issues for the Alko axle...

Ray

Copied this off Facebook from a thread on the Corrinium....

I have drilled and tapped 5mm holes to take 6mm x1.0 grease nipples....the overhang and weight place a big burden on those two bushes and the single grease nipple provided between the bushes has a long history of failing to get the grease where it’s needed...

Yes Paul, that’s my post, I hadn’t got around to posting it here, I’m not sure there are many Corinium owner perusing this site..
The lack of response to a previous post on the subject kinda shows me that it’s not a field of interest...

But thanks for picking it up.

Ray

It's most definitely a field of interest for me if a 2k bill is going to come my way in a few years ! I'm not Techi enough to carry out that sort of mod myself, but I will certainly be looking into it.

Niall.

Niall..is not at all technical, if you wish to follow my lead ten I suggest that you talk to Fraser Brown of Alko axle restoration fame.
He is easy to talk to and will reassure you that it’s a mod well worth carrying out...if...you plan as I do to keep the vehicle long term!

Cost of the modification ..about a tenner...other than th potential to negate your axle warranty; I see no negative aspects to this mod...

Ray

Anyone have contact details for Fraser Brown please

Thank you

Ray,

Thank you for the lead, I shall be contacting Fraser in due course.

Regards Niall.

No worries Niall...do post back having spoken to Fraser....if you can offer any advice that future owners might find useful.

Ray