door handle on neuvo

Hi folks anyone know how to tighten the centre handle on the habitation door .Our lancashire (neuvo) handle is working well but feels like its coming loose,please help, Jubejube.

Don't know if your Mk2 Nuevo (Lancashire) has the same handle as my Mk1 but on mine there are 4 small discs which hide the mounting screws. That would be my first port of call.

If it is like this, the screw below is not tight, so the handle becomes loose

Page 6 of this link, seems to show 3 fixings accessed by removing the inner cover.

https://www.reimo.com/de/bilder/intern/ersatzteile-daten_2012/dometic-seitz/product-documentation/data/61%20carad-rplus.pdf

Looks like the jubejube has a Seitz door then not a Hartel like mine. So can't help with that.

thanks for your diagrams Peter,ours is 2011 ,not the same as redwink, its the same as Peters diagrams,thanks for your help will let you know how we get on, jubejube

If you have the Hartal door my posts on this thread will be useful
https://www.autosleeper-ownersforum.com/t11170-worcester-habitation-door-handle-broken

Looks like my Seitz door Ron , I had mine stripped down to replace the two springs on the latches, unfortunately a pin that locks the door on the key fob dropped out from the solenoid ,its a winter repair for later on, the door works fine with the key.
Boaby

burlingtonboaby wrote:Looks like my Seitz door Ron , I had mine stripped down to replace the two springs on the latches, unfortunately a pin that locks the door on the key fob dropped out from the solenoid ,its a winter repair for later on, the door works fine with the key.
Boaby

Miriad, the Hartal UK agents, are really helpful. If you ring them they will send you the part, probably foc.

Thanks Ron,
I have the part, just haven't got around to repairing it yet, making do with the key.
Boaby