202 Boxer Side Door Middle Roller Stcking

Morning all. AS Kemerton on Boxer Chassis. Sliding door appears to be sticking on middle roller. Looks like a fairly simple replacement job, (2 hex bolts on door and plastic panel screw on end of runner guide). Anyone done it? Any surprises to look out for?
My observation is release the plastic cap on end of runner guide, remove the two hex head cap screws from door and slide the roller out of the track. Replace in opposite order! Anyone know the torque setting for the door he cap screws. Cheers. Have a great day.

It will come out by just removing the fasteners that hold it to the door. No need to remove the plastic at the end of the runner.
Support the door with a block of wood whilst you remove it.
Aftermarket brackets and rollers need checking before fitting that the rollers are round and smooth otherwise they don’t spin and skid of the runner.
15 minute job